Picotuner v3 panel 3d model
Posted: Sun Jan 05, 2025 7:25 pm
Does somebody know where can I find a Picotuner V3 panel 3d model (stl file) ?
BATC Forum
NOTE - all postings remain the copyright of the author, please get their permission before publishing elsewhere. To report online abuse: https://batc.org.uk/club-info/uk-on-line-safety-act/
https://forum.batc.org.uk/
Picotuner v3 panel 3d model
Page 1 of 1
Re: Picotuner v3 panel 3d model
Posted: Mon Jan 06, 2025 3:57 pm
Yes, in the Wiki https://wiki.batc.org.uk/PicoTuner_Hardware
Re: Picotuner v3 panel 3d model
Posted: Sat Jan 11, 2025 7:19 pm
I believe that file is not for the latest version of PicoTuner. The Power and USB ports are not aligned with the panel.
Re: Picotuner v3 panel 3d model
Posted: Sat Jan 11, 2025 7:34 pm
Could be the older version. I will have a look.
Re: Picotuner v3 panel 3d model
Posted: Sat Jan 11, 2025 7:38 pm
Is this the right size?
Test.pdf- (209.71 KiB) Downloaded 229 times
Re: Picotuner v3 panel 3d model
Posted: Sat Jan 11, 2025 7:46 pm
OK - So the one on the Wiki is the correct one. I thought it had to be. What you have done is print the version 1 panel and not the version 3 panel. Scroll down.
https://wiki.batc.org.uk/File:PicoBackPanelSTL.zip
Mike
https://wiki.batc.org.uk/File:PicoBackPanelSTL.zip
Mike
Re: Picotuner v3 panel 3d model
Posted: Sat Jan 11, 2025 9:42 pm
Many thanks Mike. It looks ok now.
Re: Picotuner v3 panel 3d model
Posted: Fri Jan 17, 2025 11:18 pm
Hi Mike, is there a model for the front panel ?
Re: Picotuner v3 panel 3d model
Posted: Fri Jan 17, 2025 11:28 pm
No - I figured people can drill 4 holes by themselves.