Hello,
I have new Pluto with Rev D PCB, and I connect an external 40Mhz from GPS.
From putty I have set fw_setenv refclk_source external , and verify with. fw_printenv refclk_source, it's OK, no problems.
But It seems that if I unplug GPS, pluto automatically switches to its internal tcxo, can anyone confirm?
Thank you, all the best 73 Franck F1SSF.
Pluto SDR Clock Source Switching
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: Pluto SDR Clock Source Switching
That is what I see here on my Rev D Pluto. Another facet of this is if people incorrectly set up a Rev D for an external source it's not immediately obvious it isn't locked to the EXTERNAL source, because it still works...
Best regards, Chris, 2E0ILY
Best regards, Chris, 2E0ILY