10GHz Test using Squarial Tx System
Posted: Tue Oct 24, 2023 9:45 am
Hi all,
I'm running a 10GHz DATV test this morning using a Squarial as a transmitting antenna. I'll keep it going until about11.30. Input power about 0.8W with other parameters as below. I'd be interested in any reception reports.
Tx Location JO01fg, beaming North,
Tx Frequency 10365.0MHz
Using Portsdown 2020 Tx
DVB-S, 333kS/s, FEC 3/4, MPEG2, Testcard 16:9
Photo attached is reception at own QTH using random pointing with Squarial Rx system (modified).
73
Jen
I'm running a 10GHz DATV test this morning using a Squarial as a transmitting antenna. I'll keep it going until about11.30. Input power about 0.8W with other parameters as below. I'd be interested in any reception reports.
Tx Location JO01fg, beaming North,
Tx Frequency 10365.0MHz
Using Portsdown 2020 Tx
DVB-S, 333kS/s, FEC 3/4, MPEG2, Testcard 16:9
Photo attached is reception at own QTH using random pointing with Squarial Rx system (modified).
73
Jen