I have one of these 3.4 - 3.8 GHz amplifiers, but I can't find any data on it.
It has an SMA in and an SMA out and a 9 pin D connector other than that no
clue to who made it, and I can't find any data on it.
I assume it is a 15 watt linear amp for 3.4 GHz.
Does anyone have a data sheet for it?
- Charles
PAT-3R4G-3R8G-H15T1
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: PAT-3R4G-3R8G-H15T1
I might have if it is the same one. Photo?
3.4 GHz HP Amplifier
Supply 12V @5.5A
Linear SSB output, typically 10W
Drive level typically 0 dBm
Appears to be in Class A, Heat sinking definitely required,
DB9 connector info:
1 +12V
2 GND
3 ?
4 Overdrive TTL Output 5V OK, 0V Tripped
5 VSWR TTL Output 5V OK, 0V Tripped
6 +12V
7 GND
8 Operational
9 TX Enable TTL Input, 0V to Enable
3.4 GHz HP Amplifier
Supply 12V @5.5A
Linear SSB output, typically 10W
Drive level typically 0 dBm
Appears to be in Class A, Heat sinking definitely required,
DB9 connector info:
1 +12V
2 GND
3 ?
4 Overdrive TTL Output 5V OK, 0V Tripped
5 VSWR TTL Output 5V OK, 0V Tripped
6 +12V
7 GND
8 Operational
9 TX Enable TTL Input, 0V to Enable
Re: PAT-3R4G-3R8G-H15T1
- IMG_0326.JPG (116.05 KiB) Viewed 1736 times