BOM for Bias T board
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
BOM for Bias T board
I have just received one of the BATC Bias T boards, thanks. Where do I find a BOM to commence building it please? I see a link to an article in a magazine CQ-TV263 but the downloads page does not show magazines going back that far for downloading. I am at chris@chriswilson.tv thanks. Chris Wilson 2E0ILY
Re: BOM for Bias T board
You really ought to read the article if you plan to make the board up there is advice on how to use. As you are a BATC member, you need to be to order from the shop, you ought to be able to download it from the members page, but I see it's not there. For non members CQTV263 is two years old so ought to be available very soon now. Perhaps there is some transition period where two year old CQTVs mysteriously go into hyperspace while they transit from the members area to the open site.
Mike
Mike
Re: BOM for Bias T board
CQ-TV 263 is on the open website, it has just not had its hyperlink published. The Elves have been busy finishing the WinterHill software build and dragging sacks of Tuners and PCBs to the Post Office!
In the interim, this link works for members and non-menbers: https://batc.org.uk/wp-content/uploads/cq-tv263.pdf
Dave, G8GKQ
In the interim, this link works for members and non-menbers: https://batc.org.uk/wp-content/uploads/cq-tv263.pdf
Dave, G8GKQ
Re: BOM for Bias T board
You are correct, slight oversight by the Elves - they couldn't see the PC screen for shop jiffy bags!
CQ-TV 263 added to the download page.
73 Noel - G8GTZ
CQ-TV 263 added to the download page.
73 Noel - G8GTZ
Re: BOM for Bias T board
Most obliging of you, many thanks Dave!