Faulty ADF4350/1 Boards

Ideas, technical topics, help and discussion for ATV enthusiasts
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Thank you
Post Reply
M0SKM
Posts: 369
Joined: Sun Jul 13, 2014 3:15 pm

Faulty ADF4350/1 Boards

Post by M0SKM » Sat Sep 22, 2018 11:57 am

Currently I am going through the process of getting my money refunded through eBay for three of these boards. All have the same fault; two ADF4350 and one ADF4351 with no PLL lock.

One ADF4350 board was replaced by another with the same fault, the ADF4351 board came from a different "UK" supplier.

I have some existing good boards here to make comparisons and have eliminated any other cause.

Most likely they're all from the same factory and have a wrong component fitted or the chips are duff.

Beware!

Steve
Find me on D Star through GB7BP

G4FRE
Posts: 197
Joined: Fri May 26, 2017 6:57 am

Re: Faulty ADF4350/1 Boards

Post by G4FRE » Sat Sep 22, 2018 12:28 pm

Have you checked which voltage regulator they put on the board?

50% of the ones i bought have 5V regulators which the adf4351 do not like

Dave
G4FRE

M0SKM
Posts: 369
Joined: Sun Jul 13, 2014 3:15 pm

Re: Faulty ADF4350/1 Boards

Post by M0SKM » Sat Sep 22, 2018 1:04 pm

Thanks yes all checked OK; correct regulators fitted.
Find me on D Star through GB7BP

Post Reply

Return to “General ATV Discussion”