Hello across the pond:
I am quite new to streaming (camera TV) with Adobe Flash Media Live 3 and BATC.TV. All is well if I use my cable network direct. I can even use the wireless side of the router into the network.
I have a LinkSys WRT54G3G-ST router that I plug my Sprint air card into. It is EVDO capable, but we do not have EVDO in my area, so I am stuck with a relatively slow speed. When I connect to your server and start streaming, it lasts for about 5 seconds. Sometimes it will automaticly try a reconnect, but always fails after a few seconds.
I know there must be some setting on the Adobe that I can change to make it work. Any help would be greatly appreciated.
Al Lee
wa4ewv@wa4ewv.net
Panama City Beach, Florida USA
Wireless streaming
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: Wireless streaming
Chris replied ...
I have reduced the bandwidth by turning off the audio, and lowering the bit rate and FPS.
All is well!
Al
wa4ewv
I have reduced the bandwidth by turning off the audio, and lowering the bit rate and FPS.
All is well!
Al
wa4ewv