Help to find connectors for DATV prototype

Ideas, technical topics, help and discussion for ATV enthusiasts
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Thank you
Post Reply
on8ge
Posts: 20
Joined: Mon Mar 09, 2015 9:20 pm

Help to find connectors for DATV prototype

Post by on8ge » Thu Jul 16, 2015 10:47 am

Hello,

I would like to find which type of connector it is and where to find it (see pic)
Image
Thanks and best 73's,

Pierre

User avatar
gm1mfn
Posts: 97
Joined: Tue Sep 09, 2008 12:32 pm

Re: Help to find connectors for DATV prototype

Post by gm1mfn » Thu Jul 16, 2015 1:12 pm

The silkscreen outline isn't quite right, but the Molex Micro Lock series should fit.

Link
Doppler effect: The tendency of stupid ideas to seem smarter when they come at you rapidly.

on8ge
Posts: 20
Joined: Mon Mar 09, 2015 9:20 pm

Re: Help to find connectors for DATV prototype

Post by on8ge » Fri Jul 17, 2015 9:49 pm

Normally, the PCB don't need to have socket on it.

In the factory, they have flat cable with a pin lock (go to the hole) and a pression connector to program the device...

That what I have to find :-) No so easy lol

Post Reply

Return to “General ATV Discussion”