Thanks Rob, I'll get a few of those.
Brian
newbee question about 10ghz
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: newbee question about 10ghz
Re NLB 310 - if there is enough interest, we could buy 25 or 50 and sell them in the shop.
Re W1GHZ boards - Malcolm G0UHY has got a price of $15 plus plus from W1GHZ.
And re Rob's post - yes, very good boards and very easy to cut up and use as pre-amps etc - it's what I use in my system.
Noel
Re W1GHZ boards - Malcolm G0UHY has got a price of $15 plus plus from W1GHZ.
And re Rob's post - yes, very good boards and very easy to cut up and use as pre-amps etc - it's what I use in my system.
Noel
Re: newbee question about 10ghz
Hi,
as Noel said the 10GHz boards from W1GHZ are $15 plus $5 P&P for up to 4 boards. I've sent off for a couple so would be interested in the BATC shop stocking the MMICs and even the mixers...hint, hint
Paul sent me his price list for his other boards too which is below if anyone is interested in any of his other projects?
PC Board Price List for W1GHZ projects - 1 April 2017
RE-ORGANIZED
Quantity
--------
TRANSVERTERS
NEW
____ Simple and Cheap Transverter for 10 GHz $15
Multiband Microwave Transverter for the Rover:
see http://www.w1ghz.org/new/Multiband_Rove ... verter.pdf
Multiband Microwave Transverters for the Rover - W1GHZ.org
http://www.w1ghz.org
Multiband Microwave Transverters for the Rover Simple and Cheap Paul Wade W1GHZ ©2008 w1ghz@arrl.net update 16 April 2008 Operating on multiple microwave bands in ...
____ Transverter Board for 1296 (right side up only) $10
____ uses Power Splitter (Minicircuits TCP-2-25x) $3
____ ADE-5 mixer for 1296 or 902 $5
____ Local Oscillator Board 1152 MHz $12
____ Transverter Board for 902 $10
____ Transverter Board for 2304 or 3456 MHz $10
____ ADE-18W mixer for 2304 and 3456 $5
____ LO Board + one transverter board $20
(902,1296, 2304, or 3456)
____ Local Oscillator Board 720 or 756 MHz $12
____ Simple Low-cost 5760 MHz Transverter for Rover $11
____ MBA-591 Mixer for 5760 Transverter $10
____ LO or Personal Beacon for 5760 or 3456 MHz $6
____ Personal Beacon for 10 GHz $6
____ Miniverter-F tiny 144M transverter for Flex-1500 $6
see kits below
____ ADE-2 mixer for VHF and UHF $5
____ 222 MHz Transverter for the FT-817 (or SDR-1000) $12
NOTE: Filter and Power Amp Module available
in limited quantities. see web page
____ ADE-2 mixer for VHF and UHF $5
____ PCB for Modest Power Amplifier (GVA-84), PGA-103 preamp,
ADL5324 Power Amplifier, other MMICs $3.50
three for $10, five for $15
____ Relay board (pin and surface mount) $3
MIXERS from Minicircuits (only available with boards):
____ ADE-18W for 2304 and 3456 $6
____ ADE-5 for 1296 or 902 $5
____ ADE-2 for VHF and UHF $5
____ MBA-591 for 5760 $10
SEQUENCERS
____ Simple, yet "Fool-Resistant" Sequencer, RevisionB $5
____ Even more Fool-Resistant Conditional Sequencer $11
GPS LOCKING BOARDS
____ VCXO lock for Microwave LO - flexible version $6
with prescaler good to 1.1 GHz
____ 80 MHz version for Multiband Transverter $3
____ Flexible VCXO Lock (GPS or other reference) $6
Low frequency version (<30 MHz)
_____ Panadapter for FT-817 and Funcube Dongle $3.50
SMALL PROJECT BOARDS:
see http://www.w1ghz.org/small_proj/small_proj.htm
W1GHZ small projects
http://www.w1ghz.org
From Microwavelengths, QST, July 2013 Sensitive RF Detector for Sun Noise and other uses Sensitive RF Detector Board PC board file for ExpressPCB included - make your own
____ Antenna Ratiometer or Handheld Network Analyzer $8
____ LED Bargraph indicator out of stock
____ Fan controller - speed proportional to temperature $4
____ Tonemeter - audio tone proportional to voltage $5
____ Lossless Current Monitor $5
____ Single-LED Battery Voltage Monitor $4
____ Utility board for Op-amps and Comparators $2.50
____ Simple, yet "Fool-Resistant" Sequencer -- out of stock
____ Revision B now available $5
____ Battery-sharing switch $5
____ Anderson PowerPole distribution board 6 position $5
____ new 9 position PowerPole distributioN board $6
____ RF power detector board for LTC5508 (12 GHz, 30dB)
or LTC5534 (3 GHz, 60 db dynamic range)
$3, 2 for $5
--------- ----------
TOTALS $
Shipping (Overseas postage went up AGAIN):
As of 20 January 2017
US & Canada $2 per order for orders under $25, $
free over $25 total
USA only Priority Mail $7 per order
Overseas $13 per order (postage went up) $
Shipping for one or two boards or up to 4 small boards
(fits in CD mailer at lower rate)
US and Canada $1.50 $
Overseas $5 $
---------
TOTAL $
Please Paypal to account wade@bicnet.net then
email copy to w1ghz@arrl.net
or Send check and mailing label to:
Paul Wade
582 Dubray Road
Cabot, VT 05647
or Paypal account wade@bicnet.net then email copy to w1ghz@arrl.net
Kits are no longer available through Chuck Steer, WA3IAC
Kits for the Miniverter-F are available from Down East
73
Malcolm G0UHY
as Noel said the 10GHz boards from W1GHZ are $15 plus $5 P&P for up to 4 boards. I've sent off for a couple so would be interested in the BATC shop stocking the MMICs and even the mixers...hint, hint
Paul sent me his price list for his other boards too which is below if anyone is interested in any of his other projects?
PC Board Price List for W1GHZ projects - 1 April 2017
RE-ORGANIZED
Quantity
--------
TRANSVERTERS
NEW
____ Simple and Cheap Transverter for 10 GHz $15
Multiband Microwave Transverter for the Rover:
see http://www.w1ghz.org/new/Multiband_Rove ... verter.pdf
Multiband Microwave Transverters for the Rover - W1GHZ.org
http://www.w1ghz.org
Multiband Microwave Transverters for the Rover Simple and Cheap Paul Wade W1GHZ ©2008 w1ghz@arrl.net update 16 April 2008 Operating on multiple microwave bands in ...
____ Transverter Board for 1296 (right side up only) $10
____ uses Power Splitter (Minicircuits TCP-2-25x) $3
____ ADE-5 mixer for 1296 or 902 $5
____ Local Oscillator Board 1152 MHz $12
____ Transverter Board for 902 $10
____ Transverter Board for 2304 or 3456 MHz $10
____ ADE-18W mixer for 2304 and 3456 $5
____ LO Board + one transverter board $20
(902,1296, 2304, or 3456)
____ Local Oscillator Board 720 or 756 MHz $12
____ Simple Low-cost 5760 MHz Transverter for Rover $11
____ MBA-591 Mixer for 5760 Transverter $10
____ LO or Personal Beacon for 5760 or 3456 MHz $6
____ Personal Beacon for 10 GHz $6
____ Miniverter-F tiny 144M transverter for Flex-1500 $6
see kits below
____ ADE-2 mixer for VHF and UHF $5
____ 222 MHz Transverter for the FT-817 (or SDR-1000) $12
NOTE: Filter and Power Amp Module available
in limited quantities. see web page
____ ADE-2 mixer for VHF and UHF $5
____ PCB for Modest Power Amplifier (GVA-84), PGA-103 preamp,
ADL5324 Power Amplifier, other MMICs $3.50
three for $10, five for $15
____ Relay board (pin and surface mount) $3
MIXERS from Minicircuits (only available with boards):
____ ADE-18W for 2304 and 3456 $6
____ ADE-5 for 1296 or 902 $5
____ ADE-2 for VHF and UHF $5
____ MBA-591 for 5760 $10
SEQUENCERS
____ Simple, yet "Fool-Resistant" Sequencer, RevisionB $5
____ Even more Fool-Resistant Conditional Sequencer $11
GPS LOCKING BOARDS
____ VCXO lock for Microwave LO - flexible version $6
with prescaler good to 1.1 GHz
____ 80 MHz version for Multiband Transverter $3
____ Flexible VCXO Lock (GPS or other reference) $6
Low frequency version (<30 MHz)
_____ Panadapter for FT-817 and Funcube Dongle $3.50
SMALL PROJECT BOARDS:
see http://www.w1ghz.org/small_proj/small_proj.htm
W1GHZ small projects
http://www.w1ghz.org
From Microwavelengths, QST, July 2013 Sensitive RF Detector for Sun Noise and other uses Sensitive RF Detector Board PC board file for ExpressPCB included - make your own
____ Antenna Ratiometer or Handheld Network Analyzer $8
____ LED Bargraph indicator out of stock
____ Fan controller - speed proportional to temperature $4
____ Tonemeter - audio tone proportional to voltage $5
____ Lossless Current Monitor $5
____ Single-LED Battery Voltage Monitor $4
____ Utility board for Op-amps and Comparators $2.50
____ Simple, yet "Fool-Resistant" Sequencer -- out of stock
____ Revision B now available $5
____ Battery-sharing switch $5
____ Anderson PowerPole distribution board 6 position $5
____ new 9 position PowerPole distributioN board $6
____ RF power detector board for LTC5508 (12 GHz, 30dB)
or LTC5534 (3 GHz, 60 db dynamic range)
$3, 2 for $5
--------- ----------
TOTALS $
Shipping (Overseas postage went up AGAIN):
As of 20 January 2017
US & Canada $2 per order for orders under $25, $
free over $25 total
USA only Priority Mail $7 per order
Overseas $13 per order (postage went up) $
Shipping for one or two boards or up to 4 small boards
(fits in CD mailer at lower rate)
US and Canada $1.50 $
Overseas $5 $
---------
TOTAL $
Please Paypal to account wade@bicnet.net then
email copy to w1ghz@arrl.net
or Send check and mailing label to:
Paul Wade
582 Dubray Road
Cabot, VT 05647
or Paypal account wade@bicnet.net then email copy to w1ghz@arrl.net
Kits are no longer available through Chuck Steer, WA3IAC
Kits for the Miniverter-F are available from Down East
73
Malcolm G0UHY
Re: newbee question about 10ghz
I got sent a link that looks interesting, my apologies I can't find it again so I don't know who it was that sent it to me, so if it was anyone on here, I appreciate it.
The link is
http://www.eisch-electronic.com/index.html
These people make various bits of kit including transverters. They do a version of the DB6NT 10GHz transverter for 3cms at 142 Euro, Shipping is 18 Euro. It does however need a 10GHz LO.
They do other kit for other bands too.
Regards
Terry
G6CRF
The link is
http://www.eisch-electronic.com/index.html
These people make various bits of kit including transverters. They do a version of the DB6NT 10GHz transverter for 3cms at 142 Euro, Shipping is 18 Euro. It does however need a 10GHz LO.
They do other kit for other bands too.
Regards
Terry
G6CRF
Re: newbee question about 10ghz
Looks like the BLB310 is getting hard to source - is there enough interest for BATC to buy say 50 from Mini-kits?
73 Noel
73 Noel
Re: newbee question about 10ghz
Looking at the NLB-310 again, the P1 point of +13dBm might be a bit low for my own application. I need +10dBm to drive the DG0VE amp. I expect that you'd need to use them on Rogers pcb too, so that's another complication. I'm going to try the LNB boards first.
Brian
Brian