Hi all,
The slow progress towards H265 (and eventually H266) continues. I now have a second Pluto for use external to the Portsdown 4 and have loaded 0303 firmware to it. What settings do I need to set in the homepage of the 0303 firmware? This Pluto is connected directly to the PC by USB and I have DATV-Easy v2.17 on the PC.
Thanks and 73 Dave.
Pluto firmware 0303 DATV settings.
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Pluto firmware 0303 DATV settings.
...are you sure I can't use a pair of 813's?...
Re: Pluto firmware 0303 DATV settings.
The right ones Dave. I have them set up here. not sure if this will work. This is mostly the defaults. Clearly your IP address will be different.
Re: Pluto firmware 0303 DATV settings.
Thanks Mike, I'll have a play tomorrow, I'm guessing the OBS IP is the PC OBS is running on.
Dave.
Dave.
...are you sure I can't use a pair of 813's?...
Re: Pluto firmware 0303 DATV settings.
No, well yes, well maybe. I suppose it could be if you wanted to control from the Pluto, or maybe it is the last one that did so, but I ignore that setting just stream to it with a script or DATV Easy. That works from any PC on the network and even the world if I open up the right ports. Evariste was able to stream to it when we tested it.
Re: Pluto firmware 0303 DATV settings.
Makes perfect sense, well it will to someone...
...are you sure I can't use a pair of 813's?...