Using SDRangel + SDR to Decode QO-100 DATV
Posted: Thu Oct 27, 2022 8:06 am
Hi All,
A new version of SDRangel has been released and I decided to try it out to receive and demodulate datv signals from QO-100 with an SDR. The interface was a bit of a learning curve for me, so I documented the steps for future reference https://www.zr6tg.co.za/2022/10/27/qo10 ... l-and-sdr/
Its still a bit glitchy, but a good place to start if you don't have minitouner etc
73,
ZR6TG
A new version of SDRangel has been released and I decided to try it out to receive and demodulate datv signals from QO-100 with an SDR. The interface was a bit of a learning curve for me, so I documented the steps for future reference https://www.zr6tg.co.za/2022/10/27/qo10 ... l-and-sdr/
Its still a bit glitchy, but a good place to start if you don't have minitouner etc
73,
ZR6TG