Hi All,
A new version of SDRangel has been released and I decided to try it out to receive and demodulate datv signals from QO-100 with an SDR. The interface was a bit of a learning curve for me, so I documented the steps for future reference https://www.zr6tg.co.za/2022/10/27/qo10 ... l-and-sdr/
Its still a bit glitchy, but a good place to start if you don't have minitouner etc
73,
ZR6TG
Using SDRangel + SDR to Decode QO-100 DATV
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: Using SDRangel + SDR to Decode QO-100 DATV
thanks Tom!
very interesting and useful!
best 73
de
i2NDT Claudio
very interesting and useful!
best 73
de
i2NDT Claudio
i2NDT Claudio
Dalmine, Italia
Dalmine, Italia