BATC Forum

Hi All,

New longmynd client available:



Changelog:

- Websocket Reconnect when longmynd gets restarted
- Higher Resolution Display on MER value
- dB Margin display (D Value)
- Decoded Status Output via Websocket

Details here:

https://www.buymeacoffee.com/zr6tg/new- ... 2022-05-27

73,
ZR6TG

Hi Tom firstly thanks for providing the community with this software, sure is nice being able to watch on other PC's connected to the network.

As I didn't have a spare Raspberry Pi to hand I thought I'd install Phil's version of Longmynd on my Jetson Nano and give it a go, well I'm glad to say all is working find even the Web interface. There is just one thing though I don't get the Callsigns displayed on the spectrum display when monitoring QO100, is there a setting for this or is this something caused by not using a Raspberry Pi ?

Cheers John G7JTT

Found the answer the LNB IF frequency needs to be set, so the spectrum frequencies match that returned from Longmynd in the debug windows.

73 John

Thanks for the feedback John, good to know it runs well on the Jetson nano as well. I'll be testing some other options as well. There is also a new version available to play with : https://www.buymeacoffee.com/zr6tg/long ... 2022-06-04

Hi Tom yes latest version is working, a small bug was found and I've private messaged you the details.

73 John