FreeStreamCoder Software to Generate Mpeg-TS Streams >> New V2.80

Digital ATV - The latest generation, cutting edge ATV - Please discuss it all here.
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Thank you

G8KWR
Posts: 28
Joined: Tue Jun 16, 2020 3:41 pm

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> soon V2.72

Post by G8KWR » Wed Oct 27, 2021 5:36 pm

Thanks for the info. I have been looking through the Intel documentation, and I think that the issue is just that they do not support hardware encoding of H.262. Probably "just" need a newer, faster computer to do the software encoding. When I eventually manage to get onto QO100, then the hardware encoding may be relevant.

Thanks to everyone for the help.

Roger

Jabi
Posts: 66
Joined: Sun Jun 14, 2020 3:23 pm

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> soon V2.72

Post by Jabi » Fri Oct 29, 2021 10:35 am

Is possible, please, send me one *.bat for work FreeStreamCoder with OBS and Pluto?
73,s de Jabi, ea2aru.

Jabi
Posts: 66
Joined: Sun Jun 14, 2020 3:23 pm

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> soon V2.72

Post by Jabi » Fri Oct 29, 2021 10:37 am

FreeStreamConfiguration:
My Pluto is in:192.168.1.8
What port is the correct for work udp with it? 8282?
Please send me news ...
73,s de Jabi, ea2aru.

g0mjw
Posts: 2311
Joined: Sat Sep 20, 2014 9:15 am

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> soon V2.72

Post by g0mjw » Fri Oct 29, 2021 12:07 pm

Jabi - yes but this information is in the manual which should be the first call rather than asking each detail in the forum.

See http://192.168.1.8/doc.php

The manual states "PlutoSDR wait for transport stream over udp on port 8282."

There is also the Wiki, also linked from the documentation page https://wiki.batc.org.uk/Custom_DATV_Fi ... _the_Pluto
F5UUI's excellent tutorials https://www.f5uii.net/en/transmit-datv- ... o=plutodvb
Several articles in CQTV
Google.

Mike

Jabi
Posts: 66
Joined: Sun Jun 14, 2020 3:23 pm

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> soon V2.72

Post by Jabi » Sun Oct 31, 2021 5:47 am

Dear Mike:
Not problem. Your software is running 100% ok. The port is 8282.
Many tns for all.

G7JTT
Posts: 338
Joined: Fri Jun 10, 2016 5:05 pm

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> soon V2.72

Post by G7JTT » Tue Nov 02, 2021 9:06 pm

GE all,

Firstly thanks too Dominique for all the work you've put into FreeStreamCoder it has made live so much easier when using IPTSin with the Portsdown.

The one issue I've been having is lip-sync my work around has been to put a sync offset of around -950ms in the advanced audio properties in OBS, well after doing some testing this evening I think I've found the cause. Click on the Tools tab then go to the VirtualCam tab, Stop the VirtualCam then play with the Buffered Frames Slider to find the sweet spot to sync the audio and video, in my case it was 25.

Hope this helps others 73 John

P.s don't forget to reset any off sets you previously used in the advanced audio properties back to 0ms
Last edited by G7JTT on Wed Nov 03, 2021 7:23 am, edited 1 time in total.

F1EJP
Posts: 74
Joined: Wed Feb 24, 2021 2:46 pm

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> New V2.75

Post by F1EJP » Tue Nov 02, 2021 9:07 pm

Hello

Here is the new version 2.75

>> Includes one of the latest version of ffmpeg 4.4

Small corrections following discussions and tests with Robert VK3IE> Thanks to him for his participation!

- implementation of checks on the values ​​of the PID and SID tables which crashed ffmpeg
- tests seem ok on Windows 11

http://www.vivadatv.org//viewtopic.php?f=78&t=866

73 Dominique F1EJP

g4saq
Posts: 44
Joined: Mon Nov 12, 2018 6:06 pm

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> New V2.75

Post by g4saq » Thu Nov 04, 2021 2:29 pm

I have a simple batch file to start all my DATV programs automatically (OBS - FreeStream coder - pluto.php).
My batch file has the line "start C:\F1EJP\F1EJP-FreeStreamCoder-v02.73.exe" at the moment.
Is it possible to make Freestream coder start encoding automatically, either from the batch file or from its ini file, please?

F1EJP
Posts: 74
Joined: Wed Feb 24, 2021 2:46 pm

Re: FreeStreamCoder Software to Generate Mpeg-TS Streams >> New V2.75

Post by F1EJP » Thu Nov 04, 2021 7:29 pm

Hello G4SAQ

Good idea i made a new version for this V2.76

to make Freestream coder start encoding automatically:

In the file C:\F1EJP\mem.ini modifie new parameter START=0 by START=1

http://www.vivadatv.org//viewtopic.php?f=78&t=866

73 Dominique F1EJP

Post Reply

Return to “DATV - Digital ATV”