DATV-Express Project

Digital ATV - The latest generation, cutting edge ATV - Please discuss it all here.
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Thank you
kd2hns
Posts: 5
Joined: Tue May 01, 2018 10:43 pm

Re: DATV-Express Project

Post by kd2hns » Fri Jun 01, 2018 7:43 pm

Charles

I upgraded the express software to v1.25p6 for my pluto on my windows 10 computer with settings (1249mhz dvb-s2 at 2200000 SR, FEC 2/3,8PSK using h264).
The MER went from 19db to 36db the Timing Lock went for 60% to 98%, RF went up by 10db, Constellation is very sharp and better too it seems so far stable. Good work on the beta upgrade. Now on my windows 7 computer v1.25p6 wouldn't start and gave a hex error. I downgraded back to v1.25p4 and it worked again. Keep up the good work and thanks for a great program.

Chuck

G4GUO
Posts: 728
Joined: Tue Feb 16, 2010 12:51 pm

Re: DATV-Express Project

Post by G4GUO » Fri Jun 01, 2018 9:49 pm

You might need to install a Microsoft re-distributable but the error message should have told you that (I re-compiled everything with a more up to date version of Visual Studio). So it is probably something else. I think I have had it running on Windows 7. I will try and make a new version that has
Lime support available this weekend. I was supposed to do it last week but I got diverted onto something else.

- Charles

dk9sas
Posts: 3
Joined: Sat Jun 02, 2018 7:57 pm

Re: DATV-Express Project

Post by dk9sas » Sat Jun 02, 2018 8:31 pm

Charles, I noticed that version 1.25p6 brought me an error about a missing audio device. When I selected the right device in Capture -> Audio and pressed "Ok" it didn't save the new value to the datvexpress.cfg file: The [CAPTURE AUDIODEVICE] entry wasn't updated and after a restart the same error came up. Altering the config file by hand worked however.
Could you maybe please leave a note in the readme where you'd like bugs reported? I found your github repo, but it seems a bit out of date/and the issues there are marked as open also for a while - are you still watching this, too?

Many thanks for your great effort in this field :)

73 Sascha

G4GUO
Posts: 728
Joined: Tue Feb 16, 2010 12:51 pm

Re: DATV-Express Project

Post by G4GUO » Sun Jun 03, 2018 11:45 am

Hi Sascha,

Best place would be to email the bug to support@datv-express.com

I have managed to re-create the issue. It seems that if there is no
valid hardware found it won't automatically save the information.

The work around is to use file->save then the configuration file is
correctly saved. This bug affects all the configuration information not
just the sound.

As far as Github is concerned, no I have not been updating it. I just
released the code so that other people could use parts of it in their own
projects. My development environment pre-dates my use of Github
so I have to manually update everything.

I read yesterday that Microsoft are talking about buying Github.

- Charles

G4GUO
Posts: 728
Joined: Tue Feb 16, 2010 12:51 pm

Re: DATV-Express Project

Post by G4GUO » Mon Jun 04, 2018 7:20 am

Sascha,

This may have fixed it, it also has better LimeSDR support (Lime must have latest firmware loaded).

https://www.dropbox.com/s/7bls8zjsueg17 ... 7.zip?dl=0

- Charles

on4bhm
Posts: 79
Joined: Mon Oct 24, 2011 5:52 pm

Re: DATV-Express Project

Post by on4bhm » Thu Jun 07, 2018 8:28 am

Just to say i was very pleased with the latest version for lime.

tested dvb-s in 4167 KSym/s in mpeg2 to on0snw repeater
both with webcam and usb capture dongle
worked fine.
made a 'travel' with camera and usb capture dongle.... not all frames were there... seemed more like 5fps.
A still video was ok.
Didn't had this with build in webcam.
(10% cpu on i7 laptop of 4 years old)

tested dvb-s2 in 4167Ksym in mpeg4 to local repeater
both with webcam (1280) and hd usb capture device.
Also here, i saw frames getting dropped while doing a 'travel' with the camera and the usb HD capture device.
(25% cpu)

this still has to be investigated.
maybe if a throw in vmix, it will be better....
to be tested.

73's
on4bhm

G4GUO
Posts: 728
Joined: Tue Feb 16, 2010 12:51 pm

Re: DATV-Express Project

Post by G4GUO » Thu Jun 07, 2018 8:57 am

I must admit I usually pipe everything through vMix as that does a pretty good job of
cleaning up the video into something that looks 'broadcast standard'. I also do most of my
testing using a looped video (saves waving my arms about all the time).

I have noticed the MER degrades when using 16APSK/32APSK which appears down to
the magnitude of the preamble symbols compared to the payload symbols. I have a
fix for this but I don't understand why I need the fix. I have read the standard
multiple times and I can't see where the different magnitudes come from. I am going
to get my calculator out and work through the maths again this morning.

Thanks for the feedback

- Charles

on4bhm
Posts: 79
Joined: Mon Oct 24, 2011 5:52 pm

Re: DATV-Express Project

Post by on4bhm » Thu Jun 07, 2018 9:33 am

Are there any cheap commercial recievers available for 16APSK or 32APSK?

I don't think i have tandbergs who can do it.... have to check...

73's
on4bhm

G4GUO
Posts: 728
Joined: Tue Feb 16, 2010 12:51 pm

Re: DATV-Express Project

Post by G4GUO » Sat Jun 09, 2018 8:28 am

https://www.dropbox.com/s/lnxqhx88qmivw ... 8.zip?dl=0

improved the 16apsk and 32apsk constellation, only tested with LimeMini

The DVB-S2 spec has two permitted versions of these constellations, the original software
had the simpler to implement version (outer constellation ring == 1). However it seems the
Serit tuners (and most others) use the other version (average symbol energy E == 1).
So while my original code technically was not at fault the new version should work better.

- Charles

g0mjw
Posts: 2329
Joined: Sat Sep 20, 2014 9:15 am

Re: DATV-Express Project

Post by g0mjw » Sat Jun 09, 2018 8:47 am

Great, I will have a go. Did you do anything to improve the TS encoding recently?

Post Reply

Return to “DATV - Digital ATV”