BATC Forum

Hi am trying to install datv express on an odroid c1+
Not having much luck
Have used the c1 image it downloads ok and ive transferred it to a card
But i only get the red led , no blue led no power on usb or lights on ethernet
Have tried different cards psu image maker prog etc
Nothing on hdmi either
Can anyone confirm whether the c1 as opposed to the c1+ image should work if not what should i be downloading?
Thanks in anticipation.

Ian.

Hi Ian

I know this sounds silly, but you have got the Micro SD Card the right way round (with the back side towards the pcb).

I put mine in the 'wrong' way round and got the same sytoms as you, reversed the card and it is all back working again.

Regards
Eric - G8EOJ

Thanks for your reply Eric. Have definitely got card the right way up - and it matches the outline of the card on the board.