wireless hdmi?

Digital ATV - The latest generation, cutting edge ATV - Please discuss it all here.
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Thank you
Post Reply
on4bhm
Posts: 79
Joined: Mon Oct 24, 2011 5:52 pm

wireless hdmi?

Post by on4bhm » Tue Jun 03, 2014 2:33 pm

Hi,

We all know that Transmitting in datv is expensive.... HD is even more expansive.
But nowadays you can find relative cheap wireless hdmi devices. they work on 5Ghz band.
What i had in mind was this:

on the TX side:
use a wdmi stick--> receive the 5ghz signal with a Kon6-4g7 from dg0ve
Amplify the signal with 23cm PA23-2-2W --> put in into 30m coax to top of mast
than use a MIX6-1mW also from dg0ve + PA6-2-600mW + 5ghz antenna.

on the RX side:
5ghz dish antenna + Kon6-4g7 --> 23cm --> long coax --> 5ghz mixer --> wdmi receiver

Can this be a cheap way of transmitting hdmi signals?
i think the bandwidth is 50Mhz...

but the video lattency is near 0 ... !!!

any comments on this?
Top
Post Reply

Return to “DATV - Digital ATV”