New Pico Tuner (Ethernet) tested at Tim’s ( G4wim) . Returned to shack and it wouldn’t get a dhcp address on my network ( on a different subnet). Is it stuck on the original subnet perhaps, and how can it be released.
Tony
Pico Tuner
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: Pico Tuner
Hi
BATC Wiki on the Pico tuner says The DHCP flow can be viewed by connecting to the USB serial port just after power up.
This may help but I have never tried it.
Keith
BATC Wiki on the Pico tuner says The DHCP flow can be viewed by connecting to the USB serial port just after power up.
This may help but I have never tried it.
Keith