PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Digital ATV - The latest generation, cutting edge ATV - Please discuss it all here.
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.

Thank you
Post Reply
G4EWJ
Posts: 1437
Joined: Wed Feb 17, 2010 10:11 am

PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by G4EWJ » Fri Aug 16, 2024 10:40 am

The latest beta version is available on the BATC Wiki: https://wiki.batc.org.uk/PicoTuner_Ethernet_Interface

Download the firmware from section 2, Updates, News and Issues: https://wiki.batc.org.uk/PicoTuner_Ethe ... and_Issues

Please post any questions or problems here.

Brian

g0mjw
Posts: 2439
Joined: Sat Sep 20, 2014 9:15 am

Re: PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by g0mjw » Tue Aug 20, 2024 3:16 pm

I have swapped out my Winterhill for a Picotuner. Apart from initially not working because still had the link in for the higher port number, it is working fine. At least so far, with one exception. I can't seem to make it switch to 13V with Rob's QuickTune. It stays set to 18V. Not sure what I am doing wrong.

So, a question arises, the whpcviewer app has 4 or 9 screens - it would be nice to have an option for two.

Edit - I should add why 13V matters. I am using one LNB for narrow and and wideband and powering it with the picotuner. I need 13V for narrow band.

G4EWJ
Posts: 1437
Joined: Wed Feb 17, 2010 10:11 am

Re: PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by G4EWJ » Tue Aug 20, 2024 4:15 pm

I see the problem with the QuickTune voltage setting. I'll release an update shortly.

I'll put the 2 screen viewer on the list.

Brian

G4EWJ
Posts: 1437
Joined: Wed Feb 17, 2010 10:11 am

Re: PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by G4EWJ » Tue Aug 20, 2024 4:33 pm

Version ptwh0v3c has a problem with applying QuickTune LNB voltage settings. Version ptwh0v3e corrects the problem.

https://wiki.batc.org.uk/PicoTuner_Ethe ... and_Issues

Brian

g0mjw
Posts: 2439
Joined: Sat Sep 20, 2014 9:15 am

Re: PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by g0mjw » Wed Aug 21, 2024 6:04 pm

It sort of fixes it, but not quite. It seems to only follow what is set for RX1. If you set RX2 to 13V, then nothing happens, it stays on 18V. At least that's what it seems to be doing in my case.

Mike

G4EWJ
Posts: 1437
Joined: Wed Feb 17, 2010 10:11 am

Re: PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by G4EWJ » Wed Aug 21, 2024 8:09 pm

I tested the fix on RX2 and it seemed to do the correct thing. Can you look at the broadcast packet on port 9997 and see what that is indicating for the VGX status. It doesn't guarantee that the pins are in the correct state, but it might give some info.

Brian

g0mjw
Posts: 2439
Joined: Sat Sep 20, 2014 9:15 am

Re: PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by g0mjw » Wed Aug 21, 2024 8:16 pm

Can you remind me how to look at the port ?

G4EWJ
Posts: 1437
Joined: Wed Feb 17, 2010 10:11 am

Re: PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by G4EWJ » Wed Aug 21, 2024 8:23 pm

Easy on an RPi, less so on a PC.

Brian

https://wiki.batc.org.uk/PicoTuner_Ethe ... _Port_9997

G4EWJ
Posts: 1437
Joined: Wed Feb 17, 2010 10:11 am

Re: PicoTuneWH - firmware for the PicoTuner with a Pico Ethernet module.

Post by G4EWJ » Thu Sep 26, 2024 2:40 pm

Use netcat -kluv 9997 to view the broadcast packet on an RPi. netcat -kluvw 0 9997 tends to wind up a processor to maximum.

Brian

Post Reply

Return to “DATV - Digital ATV”