Hi,
I would like to use the stream option in OBS to start my DVB transmission, but how can I set my own custom VPID, APID, PMT PID and PCR PID?
Pluto control PIDs via rtmp
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Re: Pluto control PIDs via rtmp
Hi,
Here are the possible settings:
Set streaming
Assume that pluto is directly connected to PC. Go to connection/new and type the URL. The parsing is very poor so, be very carefull with syntax, particularly "," which is used for parameter separator.
Frequency in Mhz: 437
Mode (DVBS/DVBS2) : DVBS2
Constellation (QPSK,8PSK,16APSK): QPSK (only QPSK in valid in DVBS)
SymbolRate in KS (33-2000) : 333
FEC (12,23,34,67,78...) : 23
Gain in dB (-71..0): 0
---Advanced parameters---
Calib mode {calib,nocalib]}: Force a calibration process (high spike) with calib
PCR/PTS delay (100-2000):default 600: if encoding suffers from underflow, increase this
Audio transcoding bitrate: Audio bitrate from OBS could not go down below 64kbit , this is used to workaround that
CALLSIGN /li>
You can copy/paste these fields
Basic setup
rtmp://192.168.2.1:7272/,437,DVBS2,QPSK,333,23,0,
,F5OEO,
Advanced setup
rtmp://192.168.2.1:7272/,437,DVBS2,QPSK,333,23,0,nocalib,800,32,
Stephane
Here are the possible settings:
Set streaming
Assume that pluto is directly connected to PC. Go to connection/new and type the URL. The parsing is very poor so, be very carefull with syntax, particularly "," which is used for parameter separator.
Frequency in Mhz: 437
Mode (DVBS/DVBS2) : DVBS2
Constellation (QPSK,8PSK,16APSK): QPSK (only QPSK in valid in DVBS)
SymbolRate in KS (33-2000) : 333
FEC (12,23,34,67,78...) : 23
Gain in dB (-71..0): 0
---Advanced parameters---
Calib mode {calib,nocalib]}: Force a calibration process (high spike) with calib
PCR/PTS delay (100-2000):default 600: if encoding suffers from underflow, increase this
Audio transcoding bitrate: Audio bitrate from OBS could not go down below 64kbit , this is used to workaround that
CALLSIGN /li>
You can copy/paste these fields
Basic setup
rtmp://192.168.2.1:7272/,437,DVBS2,QPSK,333,23,0,
,F5OEO,
Advanced setup
rtmp://192.168.2.1:7272/,437,DVBS2,QPSK,333,23,0,nocalib,800,32,
Stephane