Hi Guys!
Happy New Year to all!
Ok here goes, has anyone been playing with taking a transport stream directly from a receiver and dumping that through Mini Module FT2232H to a computer then onto a digilite or datvexpress?
Just some crazy thoughts I have..
Maybe a MiniTiouner output?
Building a DATV repeater
Forum rules
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Thank you
Building a DATV repeater
73,
Ron....
N6GKJ CM98ic
Ron....
N6GKJ CM98ic
Re: Building a DATV repeater
Hello,
If you use Minitioune with a Minitiouner or Tutioune witha TT S2-1600 or TTS2-3200, you have just to press the UDP button in the software and you can use your Digilite or DATVexpress set in the UDP mode.
The TS is directly sent from the receiver to the modulator.
It is not a crazy thought, when my Digilite has been able to work in UDP mode I have used the UDP button in Tutioune to do that.
I have describe how to do that in April 2012.
http://www.batc.org.uk/forum/viewtopic.php?f=71&t=1136
Jean-Pierre F6DZP
If you use Minitioune with a Minitiouner or Tutioune witha TT S2-1600 or TTS2-3200, you have just to press the UDP button in the software and you can use your Digilite or DATVexpress set in the UDP mode.
The TS is directly sent from the receiver to the modulator.
It is not a crazy thought, when my Digilite has been able to work in UDP mode I have used the UDP button in Tutioune to do that.
I have describe how to do that in April 2012.
http://www.batc.org.uk/forum/viewtopic.php?f=71&t=1136
Jean-Pierre F6DZP