Page 1 of 1
lnb supply voltage
Posted: Wed Mar 27, 2024 4:09 pm
by g6hfs
Hi,
Does the OpenTuner software/pi pico support lnb power control for the 13v/18v enable, as I can not get it to supply with on board voltage chip.
Brian
Re: lnb supply voltage
Posted: Thu Mar 28, 2024 8:07 am
by g0mjw
I don't know about OpenTuner, I have not tested it yet, but it works with Brian's Winterhill like firmware.
Mike
Re: lnb supply voltage
Posted: Thu Mar 28, 2024 3:53 pm
by g4eml
I have just checked and it appears that OpenTuner does not currently control the LNB supply.
The Pico hardware does support this and it does work with Portsdown and Ryde.
Colin G4EML
Re: lnb supply voltage
Posted: Thu Mar 28, 2024 6:10 pm
by g1oar
I use Rob's Quick Tune to power on the LNB supply when using Winterhill with Open Tuner
Re: lnb supply voltage
Posted: Tue Apr 09, 2024 8:00 am
by zr6tg
g6hfs wrote: ↑Wed Mar 27, 2024 4:09 pm
Hi,
Does the OpenTuner software/pi pico support lnb power control for the 13v/18v enable, as I can not get it to supply with on board voltage chip.
Brian
The test version I sent you should work for you now ?
LNB Control pins for LNB-A on PicoTuner are Pin 9 = Enable LNB and Pin 12 = Select Horizontal
LNB Control pins for LNB-B on PicoTuner are Pin 10 = Enable LNB and Pin 11 = Select Horizontal
Re: lnb supply voltage
Posted: Tue Apr 09, 2024 8:17 am
by g6hfs
Hi Tom,
Yes, can confirm all working h and v bias volts,
Cheers
Brian
Re: lnb supply voltage
Posted: Tue Apr 09, 2024 12:47 pm
by ON7TU
Hi Tom, is it possible to sent me this adapted version for LNB power supply please?
Email:
lucien.brouckaert@gmail.com
Thanks in advance,
ON7TU- Lucien