Hi,
Having issues getting 2nd video on minitiouner v2 with opentuner, the small daughter board calls for a 74HC10 but can only find them with extra part numbers like /n etc, does this matter or has it to be 74HC10 only.
Brian
Second usb port pcb
Second usb port pcb
- Attachments
-
- 20230511_123414_Original.jpeg (1.25 MiB) Viewed 5710 times
-
- Posts: 1240
- Joined: Wed Jan 06, 2016 9:46 am
Re: Second usb port pcb
I'm using some NOS I got from Langrex on eBay (cheap enough), they are 1983 date code and also finish with an N. Mine works. Got a vague recollection tis the package type, but not 100% sure.
Gareth
Gareth
Re: Second usb port pcb
Gareth,
I must have a problem somewhere else I will have to take another look and see if a connection is missing.
Dud you programme the module with the file on Tom's Web site.
Glad yours works, I take it you used the batc pcb from shop.
Brian
I must have a problem somewhere else I will have to take another look and see if a connection is missing.
Dud you programme the module with the file on Tom's Web site.
Glad yours works, I take it you used the batc pcb from shop.
Brian
Re: Second usb port pcb
Hi all,
Thanks for all the replies, but as I said you may have a duff 74HC10, I did duff final o/p to usb module so use a socket.
So all working after putting a scope on the chip to check signals.
Thanks all and Tom ZR6TG
Thanks for all the replies, but as I said you may have a duff 74HC10, I did duff final o/p to usb module so use a socket.
So all working after putting a scope on the chip to check signals.
Thanks all and Tom ZR6TG
- Attachments
-
- 20230511_183452.jpg (919.03 KiB) Viewed 5675 times
-
- 20230511_183301.jpg (931.82 KiB) Viewed 5675 times