Hi,
How can I easy set Horizontal as default LNB power and reduce to only one NIM?
Store LNB power and set to one tuner
-
- Posts: 1239
- Joined: Wed Jan 06, 2016 9:46 am
Re: Store LNB power and set to one tuner
Could you not just rotate the LNB 90 degrees so it needs 12V for the WB?
Gareth
Gareth
Re: Store LNB power and set to one tuner
Just found the setting for the LNB power. Only question left is to disable the 2nd tuner. In the spectrum view I can only tap on the top range of the screen. How can I enable to use the whole screen to tap on?
Re: Store LNB power and set to one tuner
The next version is a bit smarter and will adjust the spectrum based on the amount of transport streams. If you only have 1 transport active then it will work as the normal spectrum with a single signal for the whole screen. Should be released tonight depending on testing.
T