Done a couple of Rob PE1CHYs version.
Had an existing hole in the front panel so used that
Share your modded Minitiouner Pics!
Re: Share your modded Minitiouner Pics!
my modification of the MiniTiouner-S with 2nd USB port and 2nd LED for TS at pin 32 of the FT2232H
(thanks Benno PA3FBX for the idea)
(thanks Benno PA3FBX for the idea)
- Attachments
-
- Front mit 2. USB und 2. LED für TS.jpg (34.42 KiB) Viewed 9841 times
-
- Anschluß Tuner und 2. LED für TS an Pin 32.jpg (142.81 KiB) Viewed 9841 times
-
- Einbau.jpg (80.38 KiB) Viewed 9841 times
-
- Platine Verdrahtung.jpg (59.69 KiB) Viewed 9841 times
-
- Platine eingebaut.jpg (92.14 KiB) Viewed 9841 times
Re: Share your modded Minitiouner Pics!
Great job,
I just finished mine
mounted in the S...
I just finished mine
mounted in the S...
-
- Posts: 5
- Joined: Tue Jun 04, 2019 7:08 pm
Re: Share your modded Minitiouner Pics!
Here you can see the nice result of the extension of my Minitiouner-S (older version) with a second TS output. The PCB, designed by Benno PA3FBX, fits very well on the main board and can be built into the aluminum box perfectly. Do use an insulating washer between the PCB and the nut to prevent unwanted connections!
- Attachments
-
- 20230624_215441.jpg (131.83 KiB) Viewed 9696 times
-
- frontpaneel ON6PY.jpg (299.07 KiB) Viewed 9696 times
-
- 20230622_195007 klein.jpg (292.94 KiB) Viewed 9696 times