Share your modded Minitiouner Pics!

[G4KLB]

Done a couple of Rob PE1CHYs version.
Had an existing hole in the front panel so used that

Mod2.jpg (1.07 MiB) Viewed 9680 times

Mod3.jpg (1.15 MiB) Viewed 9680 times

working.jpg (949.33 KiB) Viewed 9680 times

IMG_2327.jpg (992.61 KiB) Viewed 9680 times

IMG_2326.jpg (796.58 KiB) Viewed 9680 times

[DG2AAO]

my modification of the MiniTiouner-S with 2nd USB port and 2nd LED for TS at pin 32 of the FT2232H
(thanks Benno PA3FBX for the idea)

[Pa3fbx]

Great job,
I just finished mine

PCB-Ready.jpg (1.16 MiB) Viewed 9558 times

mounted in the S...

2nd board fitted topside.jpg (1.08 MiB) Viewed 9558 times

2nd board fitted front-side.jpg (1005.55 KiB) Viewed 9558 times

[on6py-Rudy]

Here you can see the nice result of the extension of my Minitiouner-S (older version) with a second TS output. The PCB, designed by Benno PA3FBX, fits very well on the main board and can be built into the aluminum box perfectly. Do use an insulating washer between the PCB and the nut to prevent unwanted connections!