lnb supply voltage

[g6hfs]

Hi,

Does the OpenTuner software/pi pico support lnb power control for the 13v/18v enable, as I can not get it to supply with on board voltage chip.

Brian

[g0mjw]

I don't know about OpenTuner, I have not tested it yet, but it works with Brian's Winterhill like firmware.

Mike

[g4eml]

I have just checked and it appears that OpenTuner does not currently control the LNB supply.

The Pico hardware does support this and it does work with Portsdown and Ryde.

Colin G4EML

[g1oar]

I use Rob's Quick Tune to power on the LNB supply when using Winterhill with Open Tuner

[zr6tg]

Hi,

Does the OpenTuner software/pi pico support lnb power control for the 13v/18v enable, as I can not get it to supply with on board voltage chip.

Brian

The test version I sent you should work for you now ?

LNB Control pins for LNB-A on PicoTuner are Pin 9 = Enable LNB and Pin 12 = Select Horizontal
LNB Control pins for LNB-B on PicoTuner are Pin 10 = Enable LNB and Pin 11 = Select Horizontal

[g6hfs]

Hi Tom,

Yes, can confirm all working h and v bias volts,

Cheers

Brian

[ON7TU]

Hi Tom, is it possible to sent me this adapted version for LNB power supply please?
Email: lucien.brouckaert@gmail.com
Thanks in advance,
ON7TU- Lucien