Cariboulite with Dragon OS

Discussions about using the CaribouLite Hat for ATV and Microwave
Post Reply
g8lce
Posts: 396
Joined: Sun Dec 06, 2015 10:26 am

Cariboulite with Dragon OS

Post by g8lce » Sat Jul 20, 2024 8:11 am

Just incase you have not seen it, there is this video that shows that the Cariboulite may still have some life in it!

https://www.youtube.com/watch?v=oa9ZlwYyCxA

Martin G8LCE

HB9DUG
Posts: 29
Joined: Wed Jun 18, 2008 8:46 pm

Re: Cariboulite with Dragon OS

Post by HB9DUG » Mon Aug 19, 2024 5:32 pm

Thanks Martin !

I missed that video from the developper of Dragon OS.

I followed his video step by step and miraculously cariboulite was recognized by SoapySDRUtil without using sudo!

I have successfully tested Cariboulite on a PI4 in reception (S1G, HiF) with:
- SDR++
- SDRangel
- GNURadio
- CubicSDR

But no success with SDRangel and GNURadio on transmit.
With GNURadio using Soapy , I can see that the configuration is done correctly, but no LED TX on and no HF... :-(

Michel HB9DUG

Add on August 20

I have just compiled the gr-caribouLite block and only a source block is available...

To compile:

cd cariboulite/software/gr-caribouLite
mkdir build && cd build
cmake ..
make -j4
sudo make install
sudo ldconfig

You should see a block called "CaribouLite Source" under a section called CaribouLite

Post Reply

Return to “CaribouLite RPi Hat”