Page 1 of 1
WinterHill Commander - 3v20d
Posted: Tue Sep 05, 2023 11:38 pm
by g6hfs
Hi,
Is there away to change the WinterHill Base IP Port address, if using for address 9904 it just resets back to 9900, can this be changed?
Brian
G6HFS
Re: WinterHill Commander - 3v20d
Posted: Wed Sep 06, 2023 11:56 am
by G4EWJ
Are you running two WH's, or just experimenting? The base IP port in whpcrxcom has to be xx00.
There's an undocumented feature which expands whpcrxcom to 8 receivers. It hasn't had much testing, so expect the unexpected.
Type CTRL-R
Receivers 1-4 go to a WH on the first IP address, which has been set to use base IP port 9900.
Receivers 5-8 go to a WH on the second IP address, which has been set to use base IP port 9904
Brian
.
- Image_2023-09-06_12-38-45.png (125.85 KiB) Viewed 12456 times
Re: WinterHill Commander - 3v20d
Posted: Wed Sep 06, 2023 1:03 pm
by g6hfs
Hi Brian
Thankyou for your reply and yes, have a second WH to test
73,
Brian
Re: WinterHill Commander - 3v20d
Posted: Wed Sep 06, 2023 1:57 pm
by g6hfs
Hi Brian
All works on WH’s, is there away to make QO-100 WB Quick Tune do the same.
Brian
G6HFS
Re: WinterHill Commander - 3v20d
Posted: Thu Sep 07, 2023 11:50 am
by G4EWJ
Yes, you set up QT for 8 receivers, something like this.
Brian
.
- Image_2023-09-07_12-47-18.png (171.22 KiB) Viewed 12324 times
Re: WinterHill Commander - 3v20d
Posted: Thu Sep 07, 2023 12:30 pm
by g6hfs
Brian,
Again many thanks for your reply all working great.
Brian (G6HFS)