WinterHill Commander - 3v20d

[g6hfs]

Hi,

Is there away to change the WinterHill Base IP Port address, if using for address 9904 it just resets back to 9900, can this be changed?

Brian

G6HFS

[G4EWJ]

Are you running two WH's, or just experimenting? The base IP port in whpcrxcom has to be xx00.

There's an undocumented feature which expands whpcrxcom to 8 receivers. It hasn't had much testing, so expect the unexpected.

Type CTRL-R

Receivers 1-4 go to a WH on the first IP address, which has been set to use base IP port 9900.
Receivers 5-8 go to a WH on the second IP address, which has been set to use base IP port 9904

Brian
.

Image_2023-09-06_12-38-45.png (125.85 KiB) Viewed 7948 times

[g6hfs]

Hi Brian

Thankyou for your reply and yes, have a second WH to test

73,

Brian

[g6hfs]

Hi Brian

All works on WH’s, is there away to make QO-100 WB Quick Tune do the same.

Brian
G6HFS

[G4EWJ]

Yes, you set up QT for 8 receivers, something like this.

Brian
.

Image_2023-09-07_12-47-18.png (171.22 KiB) Viewed 7816 times

[g6hfs]

Brian,

Again many thanks for your reply all working great.

Brian (G6HFS)