WinterHill Commander - 3v20d
WinterHill Commander - 3v20d
Hi,
Is there away to change the WinterHill Base IP Port address, if using for address 9904 it just resets back to 9900, can this be changed?
Brian
G6HFS
Is there away to change the WinterHill Base IP Port address, if using for address 9904 it just resets back to 9900, can this be changed?
Brian
G6HFS
- Attachments
-
- 20230906_002942~2_Original.jpeg (522.51 KiB) Viewed 8324 times
Re: WinterHill Commander - 3v20d
Are you running two WH's, or just experimenting? The base IP port in whpcrxcom has to be xx00.
There's an undocumented feature which expands whpcrxcom to 8 receivers. It hasn't had much testing, so expect the unexpected.
Type CTRL-R
Receivers 1-4 go to a WH on the first IP address, which has been set to use base IP port 9900.
Receivers 5-8 go to a WH on the second IP address, which has been set to use base IP port 9904
Brian
.
There's an undocumented feature which expands whpcrxcom to 8 receivers. It hasn't had much testing, so expect the unexpected.
Type CTRL-R
Receivers 1-4 go to a WH on the first IP address, which has been set to use base IP port 9900.
Receivers 5-8 go to a WH on the second IP address, which has been set to use base IP port 9904
Brian
.
Re: WinterHill Commander - 3v20d
Hi Brian
Thankyou for your reply and yes, have a second WH to test
73,
Brian
Thankyou for your reply and yes, have a second WH to test
73,
Brian
Re: WinterHill Commander - 3v20d
Hi Brian
All works on WH’s, is there away to make QO-100 WB Quick Tune do the same.
Brian
G6HFS
All works on WH’s, is there away to make QO-100 WB Quick Tune do the same.
Brian
G6HFS
Re: WinterHill Commander - 3v20d
Yes, you set up QT for 8 receivers, something like this.
Brian
.
Brian
.
Re: WinterHill Commander - 3v20d
Brian,
Again many thanks for your reply all working great.
Brian (G6HFS)
Again many thanks for your reply all working great.
Brian (G6HFS)