Hi,
When I set my Winterhill to Fixed mode, so I will use an external player, where can I set the destination IP address?
Where to set destination address in Fixed mode?
Re: Where to set destination address in Fixed mode?
It's in the file /home/pi/winterhill/RPi-3v20/whlaunch-fixed.sh
Note that the second line below (whlaunch-fixed-3v20.sh) needs a # at the beginning, to comment it out.
Brian
===============================================================================================
#!/bin/bash
whlaunch-fixed-3v20.sh
# sends the TS to a fixed address
# no VLC windows are started on the RPi
# the final zero is the interface IP address which should be set if the RPi has more than one network interface
cd /home/pi/winterhill/RPi-3v20
./winterhill-fixed-3v20.sh 192.168.77.237 9900 0
Note that the second line below (whlaunch-fixed-3v20.sh) needs a # at the beginning, to comment it out.
Brian
===============================================================================================
#!/bin/bash
whlaunch-fixed-3v20.sh
# sends the TS to a fixed address
# no VLC windows are started on the RPi
# the final zero is the interface IP address which should be set if the RPi has more than one network interface
cd /home/pi/winterhill/RPi-3v20
./winterhill-fixed-3v20.sh 192.168.77.237 9900 0