Hello,
I've been trying to put on the Winterhill all afternoon.
The installation always aborts with this error.
I had first used an 8GB card. Then bought a new 32GB card.
tried with the 64bit and 32bit image for the Raspberry.
Current system as of May 3, 2023.
Does anyone have a hint?
73 Thomas
Problems installing the SD card
Problems installing the SD card
73 Thomas
DL5BCA
DL5BCA
Re: Problems installing the SD card
The "/lib/modules/6.1.21-v8+/build" suggests that you're using Bullseye.
You need "Raspberry Pi OS (Legacy) with desktop" which is Buster kernel 5.10.
Brian
You need "Raspberry Pi OS (Legacy) with desktop" which is Buster kernel 5.10.
Brian
Re: Problems installing the SD card
Hello Brian,
thank you, i will try the Buster-image.
73 Thomas
thank you, i will try the Buster-image.
73 Thomas
73 Thomas
DL5BCA
DL5BCA
Re: Problems installing the SD card
Hello Brian,
yes with Buster-image it works.
And yes: the install lines:
wget https://raw.githubusercontent.com/tomvd ... terhill.sh
chmod +x install_winterhill.sh
./install_winterhill.sh -d
must instead of the lines
wget https://raw.githubusercontent.com/Briti ... terhill.sh
chmod +x install_winterhill.sh
./install_winterhill.sh
yes with Buster-image it works.
And yes: the install lines:
wget https://raw.githubusercontent.com/tomvd ... terhill.sh
chmod +x install_winterhill.sh
./install_winterhill.sh -d
must instead of the lines
wget https://raw.githubusercontent.com/Briti ... terhill.sh
chmod +x install_winterhill.sh
./install_winterhill.sh
73 Thomas
DL5BCA
DL5BCA
Re: Problems installing the SD card
Good.
Brian
Brian