BATC Forum

Hi,

Would any one know the pin pitch of the little power supply reg boards, can not seem to find it just want to make it easy for any repairs /replacement.

Cheers

Brian (G6HFS)

1.7mm - it's the same for the various output current options.

Brian

https://www.mouser.co.uk/datasheet/2/28 ... 941098.pdf

Thanks again Brian

Brian G6HFS

Hi All,

The psu modules are obsolete and hard to find. That's why I decided to make one myself as alternative.
It contains a LM2676 regulator and two AP3418 regulators and all three voltages. Works OK, only a small mechanical error I still have to fix.(that's why the red wires are fitted between JP1 and 2)
When finished I will try to post the artwork somewhere .
73
Rob K
PE1CHY

Very nice job Rob, looking forward to finished product. This will spark more interest in the winterhill receiver.

Hi

The required power modules for the Winterhill project are stocked by Farnell UK part no 1736768.
They have 175 in stock as of 19:30 on the 28/07/22 at £5.90 each.
I have not long received mine, so my Winterhill is now complete and working well.

Many thanks to the BATC team for a great DATV receiver.

73 Keith GU6EFB

Tried to order through farnell uk but they won,t send it to the netherlands. Farnell .nl doesnt sell to private customers. Now when you try to order in the Netherlands you are forwarde to a site from Sinuss.nl. Who has any experience with these people??

Hi VE3HKS

If you require some of the units drop me an email I may be able to help you.

73 Keith GU6EFB

email gu6efb@cwgsy.net