Can the Winterhill PCB be cutted?

The place for discussion about the 4-channel WinterHill DATV Receiver
Post Reply
DG8KD
Posts: 83
Joined: Fri Nov 14, 2014 9:02 pm

Can the Winterhill PCB be cutted?

Post by DG8KD » Tue Feb 08, 2022 6:33 pm

Hi,
a question to the Winterhill experts or the PCB layouter of this board:
Due to some circumstances I would need to reduce the size of the board in the marked areas to fit in my case:
winterhill_pcb.jpg
winterhill_pcb.jpg (235.74 KiB) Viewed 2173 times
Are they any hidden traces at those points?

Thanks.

73
Rainer

g0mjw
Posts: 2327
Joined: Sat Sep 20, 2014 9:15 am

Re: Can the Winterhill PCB be cutted?

Post by g0mjw » Tue Feb 08, 2022 7:18 pm

It was designed specifically with people like you in mind Rainer.

It is a two layer board. There are no hidden tracks, a few that may have been misplaced, but none actually hidden.

Mike

DG8KD
Posts: 83
Joined: Fri Nov 14, 2014 9:02 pm

Re: Can the Winterhill PCB be cutted?

Post by DG8KD » Tue Feb 08, 2022 7:31 pm

Thanks Mike for the quick reply and the good news that the board will fit in my ordered case!

Post Reply

Return to “The WinterHill DATV Receiver”