Page 1 of 1
Pi4 Power
Posted: Sat Sep 11, 2021 3:52 pm
by G8YTZ
Can I confirm if the Pi4 on Winter Hill is powered from the GPIO Pins 2 & 4 (+ve) and 6 (-ve) Any idea what current the Pi4 4MB requires?
Justin.
Re: Pi4 Power
Posted: Sat Sep 11, 2021 4:13 pm
by g0mjw
Here you are,
- Capture.JPG (256.69 KiB) Viewed 3821 times
Not sure what current it takes as it depends on what it is doing and if anything is plugged into the USB ports. Allowing for 3A is reasonable.
Mike
Re: Pi4 Power
Posted: Sat Sep 11, 2021 7:21 pm
by G8YTZ
Mike,
perfect! Many thanks. I have a Meanwell 3A PSU to supply it, it will be internal to a repeater exciter.
Justin.
Re: Pi4 Power
Posted: Sat Sep 11, 2021 10:57 pm
by g0mjw
You might want to adjust the voltage up a bit, e.g. 5.2V. If in repeater pay attention to cooling.
Mike