Page 1 of 1
Knucker won't do 125ks
Posted: Sun Sep 18, 2022 9:09 am
by PE5PVB
Hi,
We build two Knuckers. All ok, but we can't get it to work on 125ks/s symbolrate with the Portsdown 4. Are we missing something?
Re: Knucker won't do 125ks
Posted: Sun Sep 18, 2022 1:00 pm
by g0mjw
Does the Knucker do 125 ks/s ? Remember it is DVB-T only. Lower rates will take a long time to lock up so have patience.
Mike
Re: Knucker won't do 125ks
Posted: Sun Sep 18, 2022 3:05 pm
by G1LPS Terry
Lowest we could decode was 150ks which was reliable (140ks 125ks wouldn't go)
Don't think this has changed.
Try testing at 150ks
Regards
Terry
Re: Knucker won't do 125ks
Posted: Sun Sep 18, 2022 3:09 pm
by g8gtz
PLEASE always read the BATC wiki before posting questions on the forum.
The specification on this page -
https://wiki.batc.org.uk/Knucker#Hardware - says 150ks to 2MS
73
Noel - G8GTZ
Re: Knucker won't do 125ks
Posted: Sun Sep 18, 2022 3:22 pm
by PE5PVB
Thanks. Sorry, I checked the website, but did it too fast. I thought it said 125, but it's 150
