Knucker project introduction

Discussion about the Knucker DVB-T Tuner DVB-T Receive Software. See also https://wiki.batc.org.uk/Knucker
G8GKQ
Site Admin
Posts: 1994
Joined: Sun Mar 22, 2009 1:21 pm

Re: Knucker project introduction

Post by G8GKQ » Sun Jan 24, 2021 3:19 pm

Hi Ralf

Yes, you would need to join the BATC.

But we are still awaiting delivery of the 400 tuners, so you haven't missed out. We'll announce on the Forum when they are available.

Dave

dl5eu
Posts: 5
Joined: Sat Jan 23, 2021 9:13 pm

Re: Knucker project introduction

Post by dl5eu » Sun Jan 24, 2021 7:38 pm

Hello Dave,

do you have an idea of the price of the NIM and the PCB? In the BATC shop I have not found it.

Thank you very much.

73 Ralf, DL5EU

G8GKQ
Site Admin
Posts: 1994
Joined: Sun Mar 22, 2009 1:21 pm

Re: Knucker project introduction

Post by G8GKQ » Sun Jan 24, 2021 7:52 pm

Hi Ralf

The PCB will probably be the same price as the MiniTiouner PCB (currently £4.50 + postage) and the tuner price will depend on the duty charges that we have to pay. Probably under £20.

Once the tuners arrive, we will put them on the shop.

Dave

dl5eu
Posts: 5
Joined: Sat Jan 23, 2021 9:13 pm

Re: Knucker project introduction

Post by dl5eu » Sun Jan 31, 2021 8:02 pm

Hello Dave,

will the members be notified by email when the modules are available? I do not want to miss them :-)

Regards,

Ralf

g8gtz
Posts: 1392
Joined: Wed Apr 07, 2010 6:26 pm

Re: Knucker project introduction

Post by g8gtz » Sun Jan 31, 2021 8:09 pm

I will post on the forum under the shop section and here when we get notification that they are being shipped from China and when they actually arrive

We do have 400 tuners on order so can't believe we will sell them in the first few days! We will also be ordering enough PCBs to cover initial demand but we can always order more of them on 1 week's notice.

73
Noel - G8GTZ

g8lce
Posts: 183
Joined: Sun Dec 06, 2015 10:26 am

Re: Knucker project introduction

Post by g8lce » Sun Feb 21, 2021 11:03 am

If you need a good linear for DVB-T for moonbounce etc. then there is an interesting auction coming up! 600watts enough?

https://www.ppauctions.com/assets/aucti ... 210964.pdf

but also some test equipment.

Martin G8LCE

Post Reply

Return to “The Knucker DVB-T Tuner and Receive Software”