BATC bursary - PI6MEP approved
Posted: Mon Jan 31, 2022 9:56 am
The following application was approved:
Date of application: 10/17/2021
Project description:
Currently converting and updating the analog repeater PI6MEP.
I added allready 2x Minitiouners -express with a ryde setup.
This works fine however the latest ryde updates are not compliant with express..
So the ryde designers advice me to convert to Minitiouner Pro.
Also the idea to create a dvb-t with knucker is a big wish but additional cost.
Benefits to ATV community:
introducing DATV to the old user group and adding inputs for novice amateur.
This means finally the novice hams will be capable in transmitting ATV on a affordable and responsible way.
Total amount of funding requested:
2x minitiouner pro special shop parts (70-80 euro) 1x knucker special shop parts (40 to 50 euro)
Details of costs / items:
2x minitiouner pro special shop parts (70-80 euro) 1x knucker special shop parts (40 to 50 euro)
Date of application: 10/17/2021
Project description:
Currently converting and updating the analog repeater PI6MEP.
I added allready 2x Minitiouners -express with a ryde setup.
This works fine however the latest ryde updates are not compliant with express..
So the ryde designers advice me to convert to Minitiouner Pro.
Also the idea to create a dvb-t with knucker is a big wish but additional cost.
Benefits to ATV community:
introducing DATV to the old user group and adding inputs for novice amateur.
This means finally the novice hams will be capable in transmitting ATV on a affordable and responsible way.
Total amount of funding requested:
2x minitiouner pro special shop parts (70-80 euro) 1x knucker special shop parts (40 to 50 euro)
Details of costs / items:
2x minitiouner pro special shop parts (70-80 euro) 1x knucker special shop parts (40 to 50 euro)