Howto read the status of the ryden via the network

Discussions about the Ryde "Set-top Box" Style Digital ATV Receiver. See https://wiki.batc.org.uk/Ryde_Receiver
Post Reply
pascal
Posts: 4
Joined: Mon May 13, 2019 6:33 pm

Howto read the status of the ryden via the network

Post by pascal » Fri Jan 20, 2023 2:14 pm

We use three ryden receivers in our repeater. We would like to read the status of the receivers via the network. It would be nice if information such as "dB Mer", "dB Margin", "Symbolrate", and "frequency" were available through JSON on the ryden. We can then make this information available on a web page. It would also be possible to automatically select an input based on this information using a software "sync" detection.
Top
Post Reply

Return to “The Ryde Digital ATV Receiver”