Page 1 of 2
Ryde + pi 2gb, MiniTiouner
Posted: Sun Jul 10, 2022 3:47 pm
by g6hfs
Hi,
When there is no signal and the menu is selected should the screen go blank, will some time flash back but only comes back on when the menu is deselected
Comments?
https://youtu.be/__xb10nzHss
Brian(G6HFS)
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 9:45 am
by G4IMO-TV
No Brian that's not good.
The Ryde screen should just sit there showing a red screen saying Not Locked.
Nick
G4IMO
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 9:50 am
by G8GKQ
Hi Brian
I need more information before I can investigate this.
- Was it a new build?
- What software version?
- Does the same MiniTiouner work with another Ryde, Portsdown or a PC?
Dave, G8GKQ
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 3:11 pm
by g6hfs
Hi,
Yes, current build, latest software version on and have tried it on 2 pi 4b a 2gb and 4gb separate builds, the MiniTiouner is ok on my pc and laptop
Brian (G6HFS)
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 3:34 pm
by g6hfs
Footnote:
It does the same with keyboard/mouse unplugged, and MiniTiouner in any free usb port v2 or v3 black/blue.
Brian
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 3:53 pm
by G8GKQ
Alarm Bells are ringing!
Why would you have a keyboard or mouse connected to a Ryde? If you use the recommended build, neither will do anything sensible.
What Raspberry Pi software are you using?
Dave
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 4:13 pm
by g6hfs
Dave,
I was just looking to see if a keyboard or mouse made any difference but no, I do use ssh to pi 4b
Picture with details attached.
Brian
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 4:16 pm
by g6hfs
Dave,
Sorry forgot to add soft ware on mini sd from batc shop, now updated.
Brian
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 9:01 pm
by G8GKQ
Hi Brian
I have just down a new build and not been able to reproduce this. Please provide some diagnostics by going into the menu, Select Ryde Utility and then select display test. You should get something like this:
Code: Select all
Your System Response:
pygame 1.9.4.post1
Hello from the pygame community. https://www.pygame.org/contribute.html
[2]
(1280, 720)
60.0Hz
(1, 1)
Layer successfully created
Surface successfully created
Performance test starting
Performance test complete
54.67fps
91.11%
Surface successfully deleted
Layer successfully deleted
Press any key to return to the menu
Note that you can copy code from a PuTTY or KiTTY window by highlighting it and then pasting it into the Forum.
Dave
Re: Ryde + pi 2gb, MiniTiouner
Posted: Mon Jul 11, 2022 9:19 pm
by g6hfs
Hi Dave,
Your System Response:
pygame 1.9.4.post1
Hello from the pygame community.
https://www.pygame.org/contribute.html
[7]
(1920, 1200)
60.0Hz
(1, 1)
Layer successfully created
Surface successfully created
Performance test starting
Performance test complete
21.34fps
35.56%
Tests under 75% max frame rate, performance may be impacted
Surface successfully deleted
Layer successfully deleted
Press any key to return to the menu
This is my results
Brian