- The volume control buttons on remote control now adjust the volume. Start-up volume is 60%, each button press raises or lowers the volume by 10%. These figures can be adjusted by manually editing the config file.
- The GPIO band switching lines are now active. The decimal value for the 3 binary band lines is set against each band (edited from the SSH console menu or a manual edit of the config file). The default GPIO pins are listed in the Ryde GPIO Connections https://wiki.batc.org.uk/Ryde_GPIO_Connections, but these can also be manually edited in the config file. This functionality allows an input source switch (such as a modified version of the Portsdown 8-way switch) to be driven automatically.
- The desired audio output port can now be selected from the ssh console menu. Go to option 5 Video/Audio and then select Audio. The output can be directed to HDMI, the RPi 3.5mm jack or a Portsdown/Langstone compatible white USB audio dongle.
- The DVB-T/T2 receiver will now correctly receive 1.7 MHz standard DVB-T/T2 (which, confusingly, is transmitted with a bandwidth of 1.614 MHz). This should allow reception of the Paris DATV Repeater.
- New software builds are now based on the latest version of Raspios Buster 2021-05-07.
Please report any new bugs here
Dave, G8GKQ