Building a Ryde help please
Posted: Sat Mar 27, 2021 9:54 am
I am building a Ryde
Connected Pi4 to the GPIO break out and that to display board (no Mini Tiuner connected)
On the Pi display it boots to root but there is an error
scd: cant read /home/Pi/RydeHandsets/definitions/virgin.yaml:no such file or directory.
I SSH into pi and type menu.
I go to option 6 and select a remote
I then go to option 7.
Whem I select option 7 a new window apears for a second and then vanishes.
I was expecting this to remain and then when I pressed the remote keys a number would be indicated.
Next I try option 9 followed by option 3 Stream BATC Stream Viewer
I was then expecting that if I select any of the streams it would be displayed on the Pi Monitor but this remains on the promt.
The SSH screen says it is displaying Gb3 XX stream however.
Pressing OK to clear this I navigate back to the main menu
I then try option 0 to Start the Ryde but it tells me on the SSH screen it cannot read the Ryde Handset file of the new handset I selected.
Whatever I do the pi display does not change from root.
I repeated the above with minitiouner connected but no LNB (my fuses have blown !!)
Has anyone any ideas or sugestions as to where I am going wrong and why this directory is missing from the build?
Thanks in advance
Regards
Nick
G1BVI
Connected Pi4 to the GPIO break out and that to display board (no Mini Tiuner connected)
On the Pi display it boots to root but there is an error
scd: cant read /home/Pi/RydeHandsets/definitions/virgin.yaml:no such file or directory.
I SSH into pi and type menu.
I go to option 6 and select a remote
I then go to option 7.
Whem I select option 7 a new window apears for a second and then vanishes.
I was expecting this to remain and then when I pressed the remote keys a number would be indicated.
Next I try option 9 followed by option 3 Stream BATC Stream Viewer
I was then expecting that if I select any of the streams it would be displayed on the Pi Monitor but this remains on the promt.
The SSH screen says it is displaying Gb3 XX stream however.
Pressing OK to clear this I navigate back to the main menu
I then try option 0 to Start the Ryde but it tells me on the SSH screen it cannot read the Ryde Handset file of the new handset I selected.
Whatever I do the pi display does not change from root.
I repeated the above with minitiouner connected but no LNB (my fuses have blown !!)
Has anyone any ideas or sugestions as to where I am going wrong and why this directory is missing from the build?
Thanks in advance
Regards
Nick
G1BVI