I'm using a Ryde permanently monitoring GB3EY and there is approx 10db differnce in reorted MER (D reports are lower too). I've compared against the 2 MT's I have also. The ryde works fine in all other respects.
73
Graham M1ASR
Discrepancy between Ryde and Minitioune MER/D Report
Re: Discrepancy between Ryde and Minitioune MER/D Report
Graham
The first thing to check is whether you are getting interference from the HDMI cable into the Ryde tuner input. I had a similar problem and cured it by re-routing the Ryde HDMI cable and replacing the tuner input lead with a better quality one. HDMI is very noisy!
The software (up until the MER is calculated) is almost identical in both units.
Dave
The first thing to check is whether you are getting interference from the HDMI cable into the Ryde tuner input. I had a similar problem and cured it by re-routing the Ryde HDMI cable and replacing the tuner input lead with a better quality one. HDMI is very noisy!
The software (up until the MER is calculated) is almost identical in both units.
Dave
Re: Discrepancy between Ryde and Minitioune MER/D Report
Hi Dave,
Cheers will investigate.
Graham
Cheers will investigate.
Graham
Re: Discrepancy between Ryde and Minitioune MER/D Report
All sorted, effectively finger trouble, I was using the the wrong tuner input! However, as I was seeing the repeater at over 10db, it didn't occur to me to check. A quick band preset edit and all cured. Now rx GB3EY @ 27db MER & D22.