Ryde Receiver + QO100 Live Tune

Discussions about the Ryde "Set-top Box" Style Digital ATV Receiver. See https://wiki.batc.org.uk/Ryde_Receiver
AdrianH
Posts: 87
Joined: Thu Jul 18, 2019 2:46 pm

Re: Ryde Receiver + QO100 Live Tune

Post by AdrianH » Sun Jan 31, 2021 9:18 pm

Simon,

If you are running under a Linux PC, just to let you know I am using this git hub fine
https://github.com/BritishAmateurTelevi ... /longmynd/

If you are also using the Pluto with F5OEO firmware then as mentioned the spectrum display will work with the longmynd script, just a slight mod to the script read line as mentioned in my thread (see above). This has also meant I no longer require mono installed any more. Not knowing your setup not sure if this is relevant.

There is one side to using Quicktune/spectrum display that I can find, when two signals are close the web page can sometimes show them as one larger bandwidth signal, so you still need a manual tune for that, also the Web page will not presently display less than 35KHz, longmynd receive seems to have a lower limit of 33KHz at present. So I can not attempt to RX any of the 25KHz transmissions.

Cheers

Adrian

Post Reply

Return to “The Ryde Digital ATV Receiver”