IR Remote Controls for the Ryde Receiver
Re: IR Remote Controls for the Ryde Receiver
Hi, Just added a solora RC-5 Remote...
---
name: Salora
driver: rc-5
buttons:
POWER: 0x10c
UP: 0x114
DOWN: 0x113
LEFT: 0x115
RIGHT: 0x116
SELECT: 0x135
BACK: 0x10a
MENU: 0x12b
MUTE: 0c10d
VOL+: 0x110
VOL-: 0x111
CHAN+: 0x120
CHAN-: 0x121
ZERO: 0x100
ONE: 0x101
TWO: 0x102
THREE: 0x103
FOUR: 0x104
FIVE: 0x105
SIX: 0x106
SEVEN: 0x107
EIGHT: 0x108
NINE: 0x109
Greetings and keepup the great work...
Benno
---
name: Salora
driver: rc-5
buttons:
POWER: 0x10c
UP: 0x114
DOWN: 0x113
LEFT: 0x115
RIGHT: 0x116
SELECT: 0x135
BACK: 0x10a
MENU: 0x12b
MUTE: 0c10d
VOL+: 0x110
VOL-: 0x111
CHAN+: 0x120
CHAN-: 0x121
ZERO: 0x100
ONE: 0x101
TWO: 0x102
THREE: 0x103
FOUR: 0x104
FIVE: 0x105
SIX: 0x106
SEVEN: 0x107
EIGHT: 0x108
NINE: 0x109
Greetings and keepup the great work...
Benno
Re: IR Remote Controls for the Ryde Receiver
A streamzap remote. I've mapped the stop (square) button to OSDTOG.
Code: Select all
---
name: streamzap
driver: rc-5-sz
buttons:
POWER: 0x2894
UP: 0x28a1
DOWN: 0x28a8
LEFT: 0x28a2
RIGHT: 0x28a7
SELECT: 0x28a4
BACK: 0x28ad
MENU: 0x28ab
MUTE: 0x2897
VOL+: 0x289b
VOL-: 0x289e
CHAN+: 0x2898
CHAN-: 0x289d
ZERO: 0x2880
ONE: 0x2883
TWO: 0x2885
THREE: 0x2886
FOUR: 0x2889
FIVE: 0x288a
SIX: 0x288c
SEVEN: 0x288f
EIGHT: 0x2891
NINE: 0x2892
OSDTOG: 0x28b3
Re: IR Remote Controls for the Ryde Receiver
Thanks for the update, however the streamzap has been added as screenzap.yaml so I had to rename the file before it would work.
David
David
Re: IR Remote Controls for the Ryde Receiver
Thanks for spotting that David. Now corrected.
Dave
Dave
Re: IR Remote Controls for the Ryde Receiver
Today I have built a Ryde Rx, great job! I am using a Sky remote and provide the details below:
(The OSDTOG is the i button)
---
name: Sky
driver: rc-6
buttons:
POWER: 0xc0c
UP: 0xc58
DOWN: 0xc59
LEFT: 0xc5a
RIGHT: 0xc5b
SELECT: 0xc5c
BACK: 0xc83
MENU: 0xc80
MUTE: 0x117
VOL+: 0x114
VOL-: 0x115
CHAN+: 0xc20
CHAN-: 0xc21
ZERO: 0xc00
ONE: 0xc01
TWO: 0xc02
THREE: 0xc03
FOUR: 0xc04
FIVE: 0xc05
SIX: 0xc06
SEVEN: 0xc07
EIGHT: 0xc08
NINE: 0xc09
OSDTOG: 0xccb
(The OSDTOG is the i button)
---
name: Sky
driver: rc-6
buttons:
POWER: 0xc0c
UP: 0xc58
DOWN: 0xc59
LEFT: 0xc5a
RIGHT: 0xc5b
SELECT: 0xc5c
BACK: 0xc83
MENU: 0xc80
MUTE: 0x117
VOL+: 0x114
VOL-: 0x115
CHAN+: 0xc20
CHAN-: 0xc21
ZERO: 0xc00
ONE: 0xc01
TWO: 0xc02
THREE: 0xc03
FOUR: 0xc04
FIVE: 0xc05
SIX: 0xc06
SEVEN: 0xc07
EIGHT: 0xc08
NINE: 0xc09
OSDTOG: 0xccb
- Attachments
-
- SkyRemote.jpg (227.58 KiB) Viewed 8948 times
Re: IR Remote Controls for the Ryde Receiver
Thanks for the Sky Remote. I'll add it to the library during the next software update.
Dave
Dave
Re: IR Remote Controls for the Ryde Receiver
Hi Dave
Codes for my Toshiba ct_8541 remote
Tested working OK.
Forum not allowing photo. T
File too large.
I can email it if you let me know address.
Many thanks, John
--- name: Toshiba_ct-8541
Name driver: nec
buttons:
POWER: 0x4012
UP: 0x4019
DOWN: 0x401d
LEFT: 0x4042
RIGHT: 0x4040
SELECT: 0x4021
BACK: 0x4064
MENU: 0x4045
MUTE: 0x4010
VOL+: 0x401a
VOL-: 0x401e
CHAN+: 0x401b
CHAN-: 0x40401f
ZERO: 0x4000
ONE: 0x4001
TWO: 0x4002
THREE: 0x4003
FOUR: 0x4004
FIVE: 0x4005
SIX: 0x4006
SEVEN: 0x4007
EIGHT: 0x4008
NINE: 0x4009
Codes for my Toshiba ct_8541 remote
Tested working OK.
Forum not allowing photo. T
File too large.
I can email it if you let me know address.
Many thanks, John
--- name: Toshiba_ct-8541
Name driver: nec
buttons:
POWER: 0x4012
UP: 0x4019
DOWN: 0x401d
LEFT: 0x4042
RIGHT: 0x4040
SELECT: 0x4021
BACK: 0x4064
MENU: 0x4045
MUTE: 0x4010
VOL+: 0x401a
VOL-: 0x401e
CHAN+: 0x401b
CHAN-: 0x40401f
ZERO: 0x4000
ONE: 0x4001
TWO: 0x4002
THREE: 0x4003
FOUR: 0x4004
FIVE: 0x4005
SIX: 0x4006
SEVEN: 0x4007
EIGHT: 0x4008
NINE: 0x4009
Re: IR Remote Controls for the Ryde Receiver
I think there might be a typo in there:
CHAN-: 0x40401f
CHAN-: 0x40401f
Doppler effect: The tendency of stupid ideas to seem smarter when they come at you rapidly.
Re: IR Remote Controls for the Ryde Receiver
GTMedia Remote control codes for Ryde.
---
name: gtmedia
driver: nec
buttons:
POWER: 0x311
UP: 0x347
DOWN: 0x34b
LEFT: 0x357
RIGHT: 0x353
SELECT: 0x304
BACK: 0x352
MENU: 0x343
MUTE: 0x310
VOL+: 0x342
VOL-: 0x34f
CHAN+: 0x308
CHAN-: 0x35e
ZERO: 0x31e
ONE: 0x31d
TWO: 0x31c
THREE: 0x346
FOUR: 0x315
FIVE: 0x314
SIX: 0x345
SEVEN: 0x300
EIGHT: 0x31f
NINE: 0x31b
OSDTOG: 0x313
---
name: gtmedia
driver: nec
buttons:
POWER: 0x311
UP: 0x347
DOWN: 0x34b
LEFT: 0x357
RIGHT: 0x353
SELECT: 0x304
BACK: 0x352
MENU: 0x343
MUTE: 0x310
VOL+: 0x342
VOL-: 0x34f
CHAN+: 0x308
CHAN-: 0x35e
ZERO: 0x31e
ONE: 0x31d
TWO: 0x31c
THREE: 0x346
FOUR: 0x315
FIVE: 0x314
SIX: 0x345
SEVEN: 0x300
EIGHT: 0x31f
NINE: 0x31b
OSDTOG: 0x313
- Attachments
-
- GTMEDIA.JPG (86.9 KiB) Viewed 8056 times
Re: IR Remote Controls for the Ryde Receiver
This will be handy as a few of the fellas in VK3 have the Strong SRT 5434 BOX and doing the Ryde thing:
name: Strong_SRT_5434
driver: nec
POWER: 0x159
UP: 0x106
DOWN: 0x116
LEFT: 0x15A
RIGHT: 0x11b
SELECT: 0x11a
BACK: 0x105
MENU: 0x145
MUTE: 0x119
VOL+: 0x10e
VOL-: 0x112
CHAN+: 0x11e
CHAN-: 0x11d
ZERO: 0x10f
ONE: 0x152
TWO: 0x150
THREE: 0x110
FOUR: 0x156
FIVE: 0x154
SIX: 0x114
SEVEN: 0x14e
EIGHT: 0x14c
NINE: 0x10c
OSDTOG: 0x115
Select = OK
Back = EXIT
OSDTOG = INFO
Currently volume appears not to work, not sure if its enable or should there be any Onscreen indication ?
I now understand Volume: is not working presently and is a work in Progress
Cheers
Robert
name: Strong_SRT_5434
driver: nec
POWER: 0x159
UP: 0x106
DOWN: 0x116
LEFT: 0x15A
RIGHT: 0x11b
SELECT: 0x11a
BACK: 0x105
MENU: 0x145
MUTE: 0x119
VOL+: 0x10e
VOL-: 0x112
CHAN+: 0x11e
CHAN-: 0x11d
ZERO: 0x10f
ONE: 0x152
TWO: 0x150
THREE: 0x110
FOUR: 0x156
FIVE: 0x154
SIX: 0x114
SEVEN: 0x14e
EIGHT: 0x14c
NINE: 0x10c
OSDTOG: 0x115
Select = OK
Back = EXIT
OSDTOG = INFO
Currently volume appears not to work, not sure if its enable or should there be any Onscreen indication ?
I now understand Volume: is not working presently and is a work in Progress
Cheers
Robert