Front Panel Buttons Update for the Ryde

[g0mjw]

I know that this is an old discussion, however, what voltage LEDs should I be using on the front panel?

What voltage? Just standard LEDs. I think they are typically around 2v depending on the colour.

Mike

[KA5BBC]

Thanks Mike..

Newark (US Farnell) had many voltages, from 0.5 to 24, but my guess was either 3.3 or 5 based on the board voltages.

I'm going with different colors, probably red for power and green for lock, to help my rapidly degrading eyesight (soldering is going to be fun).