MiniTiouner Pro2

Discussions about the Ryde "Set-top Box" Style Digital ATV Receiver. See https://wiki.batc.org.uk/Ryde_Receiver
Post Reply
DL5BCA
Posts: 192
Joined: Tue Jun 30, 2020 11:59 am

Re: MiniTiouner Pro2

Post by DL5BCA » Sun Jul 19, 2020 12:52 pm

Hello Dave,

It is strange.
During operation I plugged the HDMI connector into another TV ... No sound either. Then I restarted the Raspi. The TV is newer and can resolution 1920x1080 pixels. After reboot sound came ...

Then put the HDMI connector during operation back into on the older TV ... Picture and sound there !!
Reboot - sound gone ... resolution 720p 60Hz ...

I was hoping that the MiniTioune Pro2 could output a signal on every USB socket. I took the jack right next to the NIM. Then just plugged in the other USB socket ... Unfortunately, it doesn't work ...

Config: Yes now this works, too.

73 Thomas DL5BCA


I take a Mini HDMI2AV converter... It works with the "old" TV.....
I always have crazy ideas.
Please don't be surprised.
Top
Post Reply

Return to “The Ryde Digital ATV Receiver”