Preset selection

Discussions about the Ryde "Set-top Box" Style Digital ATV Receiver. See https://wiki.batc.org.uk/Ryde_Receiver
Post Reply
Pa3fbx
Posts: 232
Joined: Fri Oct 16, 2020 1:08 pm

Preset selection

Post by Pa3fbx » Sat Jul 17, 2021 9:10 pm

Hi, is ther a way to do the preset selection via the GPIO?

I run ryde on a repeater and keep changing the preset due to specific wishes..
But also for home a preset updown selection other any 2 or 3 remote controll keys would be usable...

Maybe for the wishlist if not allready installed..


73es Benno
Top
MW0RUD
Posts: 99
Joined: Fri Apr 24, 2020 3:09 pm

Re: Preset selection

Post by MW0RUD » Mon Jul 19, 2021 12:12 pm

Hi Benno,

That isn't currently possible with the GPIO, feel free to add it to file an issue on github as I can see others finding uses for it too.

It is possible to switch the receive channel using the network interface and I believe this is used by some repeaters for auto channel switching.

Tim
Top
Post Reply

Return to “The Ryde Digital ATV Receiver”