Page 1 of 1

Various QRO.cz QO100 useful parts

Posted: Mon Jun 30, 2025 12:26 pm
by Basil
As new QRO.cz parts. I built up a QO100 station for a friend but he's unwell and decided to sell it on.

1.2 meter high quality spun aluminium dish with polar mount. Collect south Manchester or north Shropshire £85


Portsdown 4 with brand new Pi Hut 7 inch touchscreen in expensive desktop case. (The old screen is included, which occasionally had lines on it or disappeared altogether). Maybe fixable, maybe not fixable...£110 It can have the latest firmware added FOC.


Adalm Pluto rev D, with SMA connector and cable added to endplate for GPS lock if desired. £160


QRO.cz LNB for 10MHz external reference with mount and lens (used if fitted to an offset dish) £45


QRO.cz 10 MHz GPSDO-PLL external reference for use with above or whatever else would benefit from a quality low phase noise GPS locked reference £125


QRO.cz bias T for use with above £40


QRO.cz 3 way splitter / combiner £35

Photos to follow, current prices and info on these parts are in the QRO.cz web shop at https://hamparts.shop/

Postage at cost, or collect near Whitchurch north Shropshire. Advertised elsewhere, too.

chris@chriswilson.tv or call me on 07971-952084 I don't do texts.

Re: Various QRO.cz QO100 useful parts

Posted: Wed Jul 02, 2025 9:08 pm
by Basil
Pluto now sold

1.2 meter dish now sold, although he now tells me he has another stored elsewhere... I need to see it to assess its condition though.